2 DESIGNS LEFT FOR CUSTOMIZATION
AR Socs fit 30rd steel/aluminum USGI and Polymer magazines including P-Mags. They will also fit larger capacity polymer magazines just will not fit flush with the magwell. They enhance your grip and control of the magazine and you wont mix them up with your buddy's mags at the range. Their entire selection of AR Socs come with a variety of custom imagery and Infowars Store now carry their current top models and have a few custom socs of our own, and we've thoroughly torture tested them prior to carrying them in our store.
- -AR Socs improve grip and control of your magazines because of the grippy laminate they put on each side. In low light scenarios mag changes are quick and precise and if you drop a mag there's no question without looking at your magazine which end goes in the rifle
- You are looking at the most customizable AR15 add on ever. Make your rifle reflect who you are!
- -AR Socs are all handmade right here in the USA to the highest quality standards.
- Improve the look of your rifles
- Assist with grip on your mags
- Made from a very strong, thin, and lightweight rubber
- Completely removable and can be reused over and over
- Noise reduction properties
- helps suppress ammo loading on mags with noisy springs
- Muffle magazine drops and bumps onto hard surfaces
- Fits most all polymer 30 round AR15 style magazines including PMag
About AR Customs
DESIGNED IN / AND U.S. MADE WITH MATERIAL EXCEPTION
AR Customs is currently located in Cedar Park, Texas and is a small business striving harder than ever to make a name in the industry that will be around for many years. Their focus is on you, the customer, and your satisfaction with thier products.
AR Customs knew there was a way to better customize and personalize their weapons in a unique way that had never been done before. They researched and tested numerous materials and finishes in order to develop their first creations, the AR Soc and AK Soc. These Patent Pending Socs do just that and allow anyone to personalize their guns in ANY way they choose with ANY design, logo, or image they choose. They can also withstand some serious abuse and should last you many years.
At AR Customs they strive to stay at the top of the market for rifle customization by offering their customers the best quality products at the best possible prices. We at the Infowars Store also are working on many new products with AR Customs and will be making those available as soon as they are ready in the VERY near future. Wear your colors proud! Make Your Gun Stand Out!!
- Additional Info
How To Install The AR SOC
**To achieve the best look: Socs should be installed with the sewn seam along the inside (front) of the magazine. Images are placed by us to that fitment. If you choose to use aloe gel to help with installation you may need to readjust your Soc on your magazine once the gel has evaporated. The gel is slippery and prevents the Soc from gripping the magazine as it normally would. Gel may cause the Soc to bunch in the area where the magazine curves. Aloe gel can also be used on the front of the Socs to condition and renew the rubber imagery areas.
Mag Socs fit very tightly onto the bottom half of your magazines. They can be installed without anything at all but will slide on easier with some assistance. The best household products we've found that will leave no residue once they evaporate are Aloe Vera Gel and Sprayway Ammonia Free Foaming Glass Cleaner. The best look is produced by installing them with the sewn seam along the inside (front) of the mag. The images are placed according to that fitment.
The Aloe works better of the two we've found and greatly assists the Soc installation. It helps avoid overstretching the imagery and will cut your install time in half if not more. You apply the gel or spray all around the inside of the Soc and slide them on slowly. You want to grab onto the imagery and pull up from the bottom of the magazine. The aloe will make the rubber slippery so, if you can, leave a small area at the top of the inside of the Soc dry so you can grab it securely. Once you have the Soc in place like you want it wipe off any remaining Aloe Gel and you're all set. It will dry in a few hours and stay in place securely.
There are many magazine manufacturers and AR Custom's products fit onto pretty much all of them. Some polymer magazines are easier than others to install Socs onto. For instance: PMAGS™ are larger than HexMags™ and may take a little longer on install. We do not recommend using aloe gel to install Socs onto HexMag™. They are thinner and fairly easy to install Polymer Socs onto with nothing at all. Also HexMags have larger crevaces that the aloe gel gets trapped in and cause bulidup underneath the Soc. It wont hurt anything but will take longer to evaporate and set.
AR Socs tightly fit the bottom half of all 30rd AR15 style magazines and 30 rd steel AK mags. When installing your AR Socs take it slow. Use Sprayway or any other ammonia free foaming glass cleaner to make installation easier if necessary. Once in place AR Socs may be loose for about 15-20 minutes but will expand to fit securely after a short time. You can uninstall and reinstall your AR and AK Soc if you wish. They are made from the highest grade neoprene material available. We researched every possible material that goes into our Socs to ensure the best possible product results.
*Note: Do not allow contact of Socs with hot rifle barrels or uppers. Socs - hot barrel contact = burned rubber. Also avoid contact with gun cleaning solvents as best as possible. To clean use a mostly water/ soap solution, if necessary, and lint free cloth. Afterwards aloe vera gel can be used to condition image area of Soc.
SKU AC-ARC-SOC-1 Laser Engraved No PVC Grip No