ProOne G2.0 Technical Information

TECHNICAL INFORMATION for the ProOne G2.0 Water & Fluoride filter element.

Return to the Propur Water Filtration section.

Scientifically tested by an independent, 3rd party, certified lab:

The ProOne G2.0 Hi-Performance Water & Fluoride filter element by Propur™ is the result of years of research, design, development and innovation.  The ProOne G2.0 2-stage filter consists of a ceramic composite silver impregnated matrix to help prevent bacteria growth and self-sterilizing with new AquaMetix™ advanced media for fluoride and other heavy metals* together providing the most efficient water filter in ONE filter element.  Easy to install, use and clean - NO priming required!

The ProOne G2.0 water filter element is designed to remove pathogenic bacteria and cysts, in addition to having exceptional chemical and contaminant removal properties. The majority of pathogenic (disease causing) bacteria and cysts are larger than one micron. The ProOne G2.0 water filter element is controlled so that it will remove Cysts greater than 1 micron, and bacteria greater than 0.7 microns.
  • Pathogenic bacteria: Cholera, Typhoid, Salmonella, Serratia, Fecal Coliform >99.9999% 
  • E. coli - >99.9999% 
  • Cysts: Cryptosporidium Parvum, Giardia Lamblia - 99% 
  • Sediment: Down to 0.5 micron - 100%,  0.2 - 0.45 micron >99.99% 
  • Contaminants: Arsenic, Nitrite, Pesticides, Herbicides, VOC's, Iron, Aluminum, THM (Trihalomethanes), PAH (poly-aromatic hydrocarbons), and other heavy metals. MTBE (methyl tertiary-butyl ether) - 90%
Contaminants list:
VOC’s >95%
Alachlor, Atrazine, Benzene, Carbofuran, Carbon tetrachloride, Chlorobenzene, Chloropicrin, 2,4-D, Dibromochloropro-pane, o-dichlorobenzene, p-dichloroben-zene, 1,2-dichloroethane, 1,1-dichloro-ethylene, cis-1,2-dichloroethylene, Trans-1,2-dichloroethylene, 1,2-dichloro-propane, cis-1,3-dichloropropylene, Dinoseb, Endrin, Ethylbenzene, Ethylene dibromide, Haloacentonitriles, Haloketones, Heptachlor epoxide, Hexachlorobutadiene, Hexachlorocyclo-pentadiene, Lindane, Methoxychlor, Pentachlorophenol, Simazine, Styrene, 1,1,2,2-tetrachloroethane, Tetrachloro-ethylene, Toluene, 2,4,5-TP, Tribromo-acetic acid, 1,2,4-trichlorobenzene, 1,1,1-trichloroethane, 1,1,2-trichloroethane, Trichloroethylene (TCE), Trihalomethanes (THMs), Xylenes.

The ProOne G2.0 contains new AquaMetix™ advanced media designed to help reduce or remove heavy metals, arsenic, fluoride, bromine, and others found in drinking water.

Chlorine, Chloramines, Monochloramines - 99%
The reduction efficiencies that may be achieved are as follows:
50% - 95% for Fluoride including hydrofluorosilicic acid and sodium hexa fluorosilicate
>50% to include Mercury and Silver
>80% to include Aluminum, Arsenic III, Arsenic V, Cadmium, Chromium VI, Iron, Maganese
>90% to include Copper, Nickel, Zinc
>95% to include Lead

Radiologicals include Radon 222, Radium, Strontium, Uranium and Vanadium.

West Virginia Elk River Chemical Spill (January 2014):  Independent lab test shows ProOne G2.0 removes the spilled chemical 4-Methyl-1-cyclohexanemethanol (MCHM).

Toledo, Ohio Microcystin-LR Contamination (August 2014): Independent lab results concluded the the Propur G2.0 filter systems reduced the Microcystin LR concentration in the tap water by at least 99.0%.

Filter Lifespan*:  ProOne G2.0 filter elements are good up to 2,400 gallons per pair- We recommend you replace your ProOne G2.0 water and fluoride filter elements at least every 12 months for the  ProOne 5”, 7”and 9”, 6 months for the ProOne 4”. 

*Due to the wide variety of contaminants that may be present in your water supply, the length of time the ProOne G2.0 Water & Fluoride filter elements require for replacement and the amount of removal/reduction may vary. Some contaminants may be more easily filtered than others. Percentage of reductions may vary from 50% to 99% over the life of the filters based on the level of contaminant(s).

Return to the Propur Water Filtration section.