Tennessee Arms 80% Lower AR Receiver

Quick Overview

3 Easy Steps To Ordering



  1. (1.) Pick 1 of 4 Color Options

  2. (2.) Pick 1 of 5 Designs

  3. (3.) Check The Box To Verify You're Over 21


Thats it!  Add it to your cart and we'll mail your custom AR-15 80% Lower Receiver in about 3 days!


** Lower Receiver Includes Jig **

Retail: $140.00

Now: $130.00

Savings: $10.00 ( 7.14% )

* Required Fields

Retail: $140.00

Now: $130.00

Savings: $10.00 ( 7.14% )

More Views

Description

Registration Free Firearms Are A Reality

Tennessee Arms Company and the Infowars Store bring you the most advanced 80% lower AR receiver on the market. 

Manufactured from a fiber-reinforced Nylon blend with extreme resiliency. Using our patent-pending technology, Marine-Grade Brass inserts are permanently molded into the receivers at the Grip Screw & Buffer Area. These metal threaded inserts increase durability without sacrificing weight savings of the composite bodies. Colors are injected throughout the receiver during molding thus eliminating the worry for a scratched or marred finish.The end result is a sturdy 80% lower receiver that is light to carry without compromising functionality.

Sporting a redesigned bolt catch area, a repositioned buffer retainer, and all the upgrades from previous models, this design is optimal. Enhancements are from customer-expressed opinions that we valued & then turned back into our product. Our 80% lower receivers are constructed to accept any mil-spec Lower Parts Kit. With an unmatched versatility for parts, customers are pleased when the builds are completed.Tennessee Arms Company is unceasing in our efforts to improve our design for our customers' future builds.

 

ALL TN ARMS CO Products come with a lifetime guarantee. They stand behind their products 100%.. They believe the finest way to show this is through impeccable customer service which includes a warranty that stands firm. They invented this type of 80% lower receiver, and they work continuously to keep it second-to-none. 

  • Nylon 6-6 Body
  • Marine Grade Brass inserts in Buffer Tower and Pistol Grip
  • Lifetime Warranty against Breakage or Failure
  • Available in Magpul Matching Colors
  • 5.6 Ounces Stripped
  • Jig Included

All you need is a drill press and the following bits to complete your 80% project!

 

  • 7/16" End Mill
  • 5/16" Drill Bit
  • 3/8" Drill Bit
  • 5/32" Drill Bit

* * * SHIPS TO U.S. ADDRESSES ONLY - NO INTERNATIONAL ORDERS * * *

 

 The ATF has determined that this 80% lower Receiver IS NOT A FIREARM in its present form. This means we can ship it directly to you to be completed. 

Determination Letter

Additional Info
SKU TA-80ARLOW
Reviews

REVIEW SNAPSHOT®

by PowerReviews
 
3.5

(based on 11 reviews)

Ratings Distribution

  • 5 Stars

     

    (4)

  • 4 Stars

     

    (2)

  • 3 Stars

     

    (3)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (2)

64%

of respondents would recommend this to a friend.

Pros

No Pros

Cons

No Cons

Best Uses

No Best Uses
    • Was this a gift?:
    • No (10)

Reviewed by 11 customers

Displaying reviews 1-10

Back to top

Previous | Next »

(4 of 4 customers found this review helpful)

 
5.0

Fantastic lightweight receiver.

By Dommy ben

from Colorado springs

Best polymer receiver on the market Tennessee arms offers a lifetime warranty, nuff said.

  • Was this a gift?:
  • No

(6 of 6 customers found this review helpful)

 
5.0

Received my "Don't Tread On Me" Lower today!

By PMNOrlando

from Orlando, FL

Came with 80/20 Lower (3pieces), small bag of screws and a Tennessee Arms Sticker

(6 of 7 customers found this review helpful)

 
5.0

Great product, shipped out lighting fast

By Sgt Mcgilicutty

from Free America

Very happy with product! Buy one support the show!

  • Was this a gift?:
  • No

(7 of 7 customers found this review helpful)

 
5.0

High Grade Material & Best of All, Its a GHOST Lower!

By 300SpartansNeeded

from Downey, CommieFornia

Pros

  • Metal threaded, easy to create! Total Privacy

Cons

  • After years of use, buffer tube ring will crack

Best Uses

  • Great printing, Ghost Privacy, EXTRA Replacement

Guys, having a ghost lower as a replacement or backup is always a great idea to do. Yes, there are cheaper lowers, but you should consider helping InfoWars stay open and continuing the fight. I love the printing they did on these by the way.

  • Was this a gift?:
  • No

(4 of 4 customers found this review helpful)

 
4.0

These lowers are good, but....

By The Dude

from Los Angeles, California

I bought one of these before from Tennessee Arms. It's easy to mill and it's lightweight.

Since it's a polymer, you can't anodize it like you can with an aluminum receiver, but if you want to give it a good paint job, you can definitely use Duracoat or Cerakote on it (you might want to give it a once over with some sand paper to make the paint stick to it better). As far as building goes, use the jigs, measure twice and cut once. I'd recommend using a variable speed router for the milling and a drill press for all of the holes (don't use a drill press for the milling). And a good drill press vise would be handy to have too, but you can make due with some c-clamps.

The lighter weight of the polymer will definitely make your rifle easier to carry when you're hiking several miles to hunting spots.

There are some things you have to take in to consideration when you're making your AR-15. You do have to follow any of your state's regulations in regards to making one. In California, you do need a serial number engraved on the lower receiver (this number can be any number you want). In that state, if the rifle is "featureless," as long as the serial number is on the receiver, you do not have to register it and you do not need to install a bullet button. If you do have features like a pistol grip or a front vertical grip, you do have to register the rifle as an assault rifle (if it's registered as an assault rifle, you need a bullet button or a non-removable magazine). You also need to have magazines that carry 10 rounds or less.

I believe New York has similar laws as well, but check with your states DOJ before you start your build.

  • Was this a gift?:
  • No

(2 of 3 customers found this review helpful)

 
4.0

Good Thickness, strong poly

By Right Mechanic

from USA

Shipped fast and received. Jig easy to use. They sent wrong color and logo, never sent return to label for pick so after 5 days just decide to use it.Inforwars tried hard to make it right but tenesee arms didn't send ups label or nothing. Looks nice quality and plenty thickness around mag. Don't see a problem should be easy to machine

  • Was this a gift?:
  • No
 
3.0

Not Available in "Minutes"

By Jack

from Central Texas

Verified Reviewer

Required substantial filing and drilling on lower for the rear barrel mount to fit. It definitely was not available in "minutes." Fitting the barrel alone took many hours. TN Arms instructions are poor, to say the least. My biggest disappointment was the barrel did not drop right in.

  • Was this a gift?:
  • No

(5 of 6 customers found this review helpful)

 
3.0

No support for this.

By NW Quail

from Olympia, WA

I recently bought an 80% from a competitor as well. It came with directions of how deep to drill it with what size bits, etc. This came with nothing but the jig and some screws to hold the jig together. No drawings no instructions, just a sticker. Not that big of a deal as I can use the other instructions. But I own my own business as well and this level of support is not the way to Win Win. The only real benefit is no need to anodize after milling like the competitor. The finish is ok and they got my logo order correct.

  • Was this a gift?:
  • No

(7 of 8 customers found this review helpful)

 
3.0

This is a polymer receiver. Excellent jig setup, easy to fin

By UC11

from NY State

Pros

  • Lightweight, easy

Cons

    Best Uses

      Arrived very quickly, very professional service. The drilling jig is simple to use. An overall fun project . Great for beginners who lack tools to work with aluminum.

      • Was this a gift?:
      • No

      (1 of 2 customers found this review helpful)

       
      1.0

      Not that great of a deal

      By gundr

      from whitefish, mt

      Verified Reviewer

      Love to support infowars, but this product is not what I expected.

      • Was this a gift?:
      • No

      Displaying reviews 1-10

      Back to top

      Previous | Next »